1. A bubble film needs to be laid on top of the film switch in order to press the film switch to reduce the work of the key, so that it will not cause damage to the keys, should be saved.
2. The front and back sides of the film switch will have a transparent film is used to protect the film switch a flash window, this film is not to tear down when using.
3. Take the film switch when you should double the care, do not appear scraping phenomenon, after taking the other to be neatly placed to restore the original.
4. When the number of film switches is relatively large, in the boxing should pay attention to the switch panel do not put flat, to put up, so as to effectively avoid the film switch button for a long time under heavy pressure damage.
5. The line-out of the film switch should pay special attention to when packing and placing, be sure to let the line-out direction of the film switch on top.
6. There is a window of the film switch, in the take and storage should be careful to avoid the film switch force to produce bends, otherwise there will be unrecoverable creases, thereby causing damage to the film switch.
7. When storing and placing, thin film switches should be dust-proof and moisture-proof, to ensure that there are no strong acids, strong alkalis or other corrosive gases and substances in the storage environment. At the same time, pest prevention should be done.
